Actuator MP 10 CR with integrated regulators
|
| Actuators with built-in constant temperature controller MP 10 CR are used in central heating systems with a mixing valve. The actuator maintains a constant temperature of the heating circuit medium. Using the built-in DIP switch (located under the actuator housing), we can select additional functions such as:
- actuator rotation direction,
- minimum temperature limit - selectable +60 or +70°C,
- maximum temperature limit - +55°C,
- mixer protection against blocking.
No external controllers are required for the device to operate. The actuator's operation, i.e. the actuator's rotation direction, is indicated by LED diodes.
Upon request, the actuator can be mounted on mixing valves from other companies (see below). |
|
Type |
Catalog number |
|---|---|
| Actuator with built-in constant temperature controller MP 10 CR with adapter A 101 | 401051 |
| Adapter A 101 for MIX M, MIX MT WOMIX mixers - factory equipment | 401101 |
| Adapter A 062 for mixing valve WITA Minimix und Typ H, Meibes V6 | 401062 |
| Adapter A 063 for mixing valve Meibes V7 | 401063 |
| Adapter A 064 for mixing valve ESBE, Danfoss | 401064 |
| Adapter A 065 for mixing valve ESBE, Danfoss VRG, VRB | 401065 |
Technical data:
| Supply voltage: | 230 V, +/- 15V, 50/60 Hz |
| Power consumption: | 3,5 VA |
| Connection: | plug 230 V |
| Torque: | 10 Nm - for nominal voltage |
| Rotation angle: | 90° |
| 90 degree rotation time: | 135 seconds |
| Protection class: | II |
| Degree of protection: | IP 40 |
| Supply temp. sensor: | NTC, 8,5kΩ for + 25°C, dł. 1 m |
| Maksymalna temperatura pomiaru: | 110°C |
| Temperature regulation range for heating: | 20 - 80 °C |
| Maximum limit temp. | +55 °C |
| Minimum limit temp. | +60 °C or+70 °C |
Actuator connection diagram MP 10 CR:
